One Way Needle Roller Thrust Bearing Single Row Freewheel Clutch Use
Description,
| Material: | GCr15,GCr15 SiMn , G20Cr2Ni4A |
| Bore Size: | 10mm-30mm & Special diameter Upon the customers' request |
| Main Market: | North & south America, European countries, Middle East |
| Delivery Time: | 5-15 days After order confirmation |
| Physical Characteristics: | 1) needle bearing can be separated by single row. |
| 2) This kind of bearing can be submitted to high radial load and some axial load. |
| 3) The rolling element of needle roller bearing is needle, the two ends of the external lines have the corrective slope which can eliminate the contact stress. |
| 4) Moreover, we can manufacture these bearings according to customer's drawings and samples |
Type CXC-B
Type CXC-B is roller type freewheel non-bearing supported.Nominal outer diameter is the same as a series 63 ball bearings. Bearing are required to support axial and radial loads. Units are delivered grease lubricated
Standard arrangement is to install this type alongside a bearing with the same location tolerance. The inner race is keyed to the shaft. Additional side notches the outer race provide for positive torque transmission.
1.free sample bearing
2.ISO Standard
3.Accept small order
4.In stock
The single direction thrust ball bearings consist of a shaft washer, a housing washer, and a ball and cage thrust assembly.
2. The bearings are separable so the the mounting is simple as the washer and the ball and cage assembly can be mounted separately.
3. The bearings can accommodate axial loads in one direction and thus locate a shaft axially in one direction. They must not be subjected to any radial loads.
4. The bearings are available with either a flat seat surface on the housing washer or a sphered seat surface.
If you need bearing price list, welcome contact us.
